Building a custom closet doors of a wooden armoire can enhance the look of your closet or repair existing damage without resorting to a complete remodeling project. Cut the wood paneling their measured sizes. Once cut, sand the sides with electric sander. In order to get the best result at the edges sanded you should start with a coarse grade sandpaper. The grade change must be made after sanding the surface in the best way possible with the rougher grade.
Once sanded the door to the desired goal, apply paint or stain of your choice. You will need to apply several coats for best results. Lightly apply each layer, allowing the layer is completely dry before the next application. Place the panel down and score points for the hinges and four inches from the top and bottom of the custom closet doors.
Drill pilot holes in the panel for the wood screws, and then place the hinges. Turn the panel and mark the position of the door handle, drilling a pilot hole and secure the handle also. Place the door in the closet, marking the areas where the hinges are connected with wood screws. Drill pilot holes for the closet itself, and then place the custom closet doors.