Closet organizers ideas – Remove everything from the closet organizers ideas, including existing shelves and hanging rods. Measure the location of the upper rack. Must be at least 10 inches from the ceiling, but can be adjusted according to your preference. Locate the center bolt in the center wall of your closet, and mark with a pencil along the line marked by the height. Measure the length of the wall and confirm your shelf is cut to size. If not, cut the platform to length with a hacksaw. Hold the bar rack mount against the wall along the line marking high. Measure a distance of 16 inches to find another screw stud and drill another screw on the mounting bar.
Install the vertical standards closet organizers ideas (or bars) at the desired distance. Vertical rules should be no more than four inches from the end of the shelf on each side to support the shelf properly. Do not place the standards of more than 24 inches apart.
Confirm the standard vertical bar is level. Drill a screw into the wall at the bottom of the vertical standard to mount the bracket. Place the vertical supports standards closet organizers ideas in the desired heights for the shelves. Mount the shelf on the supports.